ABOUT US ¡¡ PRODUCTS ¡¡ SERVICE ¡¡ NEWS CENTRE ¡¡ CONTACT ¡¡ HOME

 

¡¡FUEL OIL SEPARATOR

Next page  

Model PDSD-5000 separator is mainly used to remove water and mechanical impurities from fuel oil, lubricating oil and other mineral oil in marine diesel engine unit and land-used diesel generator unit of power station so as to reduce wear of the diesel engine and other machine, and prolong engine life. The model is also used to separate two unsolvable liquids with different specific gravity or remove small amount of solid particle from liquid.

The machine adopts automatic control, it has the advantages of high efficiency, low oil consumption, convenient operation and economic maintenance cost.

The clear oil and dirty water are pumped out by centripetal pump, the sludge is discharged automatically and fully.
The machine is one kind of rotary machine with high speed, After accurate dynamic balancing, it can run for long time with low vibration, safety and security.


Model PDSD-5000

The design, product and acceptance are conformed to the standard of GB/T5745 ¡°Disc Separator¡±.

Dimensions

Automatic Control System Principle

Water Control: Automatic control unlocking water, sealing water and water-seal/water switching.
Pneumatic Control: Filter and adjust compressed air, control three-way changeover pneumatic valve.
Temperature Control: Automatic control the temperature of the oil line, also control separately or with electric control cabinet at the same time.
Buzzer Control: Monitor oil temperature, pressure, over loading, non-discharging and leaking, and Offer a group of passive contactor stretching out to control panel.

Main Technical Specification


discharging type

full discharging

rated capacity l/h

5000

motor power kW

11 £¨ 380V/50Hz/3P £©

N.W. kg

1180

dimension L¡ÁW¡ÁH

1250mm ¡Á 1154mm¡Á1630mm

export

dimension of package L¡ÁW¡ÁH

1580mm ¡Á 1440mm ¡Á 1900mm

G.W. kg

1380

Foundation



Installation Notice


1. Take into consideration the enough space available to maintenance and repair separator before installation.
2. The foundation must be firm, plan and leveling.
3. All the pipes connecting with separator should be flexible.
4. The operation water of the separator must be soft water, the pressure of which is between 0.025MPa and 0.03MPa.

Condition for mineral oil separation and actual capacity (refer to the chart)

oil types

fuel oil

lubrication oil

fuel oil

heavy fuel oil

SAE30/40

detergence oil

steam turbine oil

kinematical viscosity £¨ mm 2 /s £©

1.9-5.5

5.5-24

120

180

380

100-120

61.2-74.8

40 ¡æ

50 ¡æ

40 ¡æ

40 ¡æ

density/ £¨ kg/m3 £© (20 ¡æ )

£¼ 900

900-991

880-900

£¼ 900

separating temperature£¨¡æ£©

normal temperature ¡¢ 40-60best

90-98

80-95

recommended capacity (l/h)

6000

5000

2750-3000

2250-2500

1750-2000

2500-3000

1250-1500

4000-4250

If you have special requirement, Please connect with us.

Reserve the right to change specifications without prior notification.

 

 
ABOUT US ¡¡ PRODUCTS ¡¡ SERVICE ¡¡ NEWS CENTRE ¡¡ CONTACT ¡¡ HOME
Leyu economic&development zone·Zhangjiagang·Jiangsu province·China.
Copyright © 2008 peony centrifuge. HuiNet .