PALM OIL SEPARATOR

Next page  

Model PDSP7500 separator is a new type of palm oil separator which designed and manufactured by our factory according to customer's requirements.
It is used for clarifying and purifying at same time also used to clarify and purify the similar materials.
This is a new type of partial discharge and high speed centrifugal separator ,it has advantages such as it is not necessary to stop feeding and less fresh water and oil consumption,
This separator running smoothly ,less vibration and lower noise by

dynamic balance. Performance of the separator is good and easy operation. Both manual and auto operation can be done.

MODEL:PDSP-7500

Main Technical Parameters for PDSP7500

Capacity (L/H) 7000-7500
equivalent sedimentation area(cm2) 27x10
Discharge of Sediment Partial Discharge
Output Pressure (Mpa) + 0.2
Power supply of motor(kw) 11
Weight(kgs) 1180
Dimensions(LXWXH) mm 1570x1440x1900

 

Working Principle

Model PDSP7500 separator is composed of in and out unit, bowl, water supply unit, spindl,frame, tachometer brake and motor, this separator make use of different specific gravity of oil, water and sludge and obtained different centrifugal force in the force field to separator.
The purified oil will be output through light phase port of centripetal pump, the water will be flowing out through throttle orifice of specific gravity ring, the sludge will be discharged through discharge port.


1.Feeding
2.Light phase
3.Heavy phase
4.Discharge port
5.Seal water
6.Operation water
7.Water seal/water make up

Diagram


 
ABOUT US   PRODUCTS   SERVICE   NEWS CENTRE   CONTACT   HOME
Leyu economic&development zone·Zhangjiagang·Jiangsu province·China.
Copyright © 2008 peony centrifuge. HuiNet .